It can be frustrating if you are in the middle of your trip on the road and suddenly you notice braking lights on your dashboard. The braking lights coming on mean something bad with your brakes, and you should immediately stop and park your car on one side of the road for safety reasons.
There could be so many reasons explaining the brake lights as anything minor failure in one of the components can damage the whole braking system.
So, braking lights could be on because of the low brake fluid or worn-out brake pads. It would be better if you call the mechanic so that he can diagnose what has gone wrong and fix your car immediately.
Always check the braking system before you start your journey, and if your find any minor problems, then fix them so that they don’t become a major problem in the future.
Bad brakes can lead to accidents, and it would be better to have safe brakes in your cars to drive safely without any worry.
Table of Contents
- What Reasons Would Cause Your Brake System Warning Light To Come On?
- Can You Mess Up Your Brakes By Braking Too Hard?
- What Are The Signs Of A Bad Brake Caliper?
- What Are The Signs Of Low Brake Fluid?
What Reasons Would Cause Your Brake System Warning Light To Come On?
There could be many reasons why your braking lights can come on, so to diagnose your car, you should know all about what could be the cause or reason for the brake lights turning on. So here is a list of causes that you can look into to determine the issue in your car:
- Worn-out Brake Pads: Your braking light turns on when there is wear and tear in the brake pads; as a result, your car will not stop properly, and you will be left stranded on the road with the lights turning on. This is why it is recommended to have your brake pads replaced or check them regularly for any wear and tear to avoid the hassle of your car stopping in the middle of the road with these lights turned on.
- Low brake fluid levels: You should check your brake fluid level to tell you how much fluid has left in the system so you can see if it is low or what kind. The first place to look at it is your master cylinder reservoir which will contain the brake fluid. If there is still a little left over from when you filled it up, then there might be a leak while driving that has caused your lights to come on, and that is why it is recommended to check if the parking brake is on or off after every drive.
- Defective sensors: There could be a faulty sensor in your braking system, so if you can check your brake warning lights if it stays on with the parking brake off and you are still on a slope, then this may be an issue as there is a chance of loose connection and worn out wires in your system.
- Engaged parking brakes: One thing you are most likely to do while driving is forgotten to turn the parking brake off. The parking brake is the one that keeps your car in place while you are stopped, so when it is not off, the vehicle will start to roll again. This would cause your lights to turn on, which means that there is something wrong with your brakes because they would not be pushed down when you shift gears or drive slowly through a stop sign or at a red light.
Can You Mess Up Your Brakes By Braking Too Hard?
Yes. It is possible that your brakes can be messed up by you braking so hard. Unfortunately, most drivers ignore how they drive and brake, as you can more likely damage your brakes because of the continuous harsh or hard braking habit.
You should know that regular hard braking causes wear and tear on the brake pads, and also it produces excess heat in the braking system, which can cause further damage to any of the components.
Constant harsh braking allows the ABS to act when it is not needed, making it wear out and more stress on the braking system. So it is important to drive your car correctly and brake as much as possible when you need to stop.
What Are The Signs Of A Bad Brake Caliper?
Brake calipers are a vital part of your vehicle’s brakes. However, when worn out, they may make a grinding noise when you use the brakes on your car. This problem can cause wear and tear to the rotor or pads, leading to increased stopping distances and higher repair bills down the road if left untreated.
So it is better to look out for the signs that hint at the failing of the brake caliper. Here are some of the signs and symptoms suggesting a bad brake caliper:
1. Soft brake pedal:
When the brake pad is worn out, metal debris rubs on the brake pad, which leads to metal particles penetrating the brake drum and causing a “soft” brake pedal.
2. Noisy brakes:
When the caliper is worn out, metal debris rubs on the brake pad and causes vibration on the rotor or pads that your driver’s seat can hear. If you hear any noise coming from your car’s brakes, have it checked out by a mechanic as soon as possible.
3. Hard-to-stop car:
When a caliper becomes worn out and metal shards rub against the rotors or pads, your car’s stopping ability will suffer greatly. For instance, if the brake pad is worn out, the rotors will become hot and rub against the brake fluid, causing the car to stop with a screech.
What Are The Signs Of Low Brake Fluid?
Have you ever wondered how to tell if your brake fluid is low? Knowing the signs of low brake fluid is a good idea so you can respond quickly and get things back up to a safe level. Here are some surefire signs that your brake fluid may need attention.
You don’t have enough braking power when you press on the brakes. This could be due to low or old brake fluid. When you release the brake pedal, the pressure is still applied.
Again, this could be due to low or old brake fluid. Your vehicle pulls to one side when you apply the brakes. This is a sign that the brakes might need attention. Again, this could be due to low or old brake fluid.
Poor responsiveness is when your vehicle comes to a complete stop. This is a sign that your brakes may need attention. This could be due to low or old brake fluid. Don’t wait until you experience these signs before checking the brakes for proper working order.