Do You Let Off The Gas When Shifting An Automatic?

If you let off the gas pedal when you shift gears in an automatic transmission, do not fear: You’re not doing anything wrong. Because the experts say that if you want to achieve the correct rpm, then letting off the gas when shifting is preferable. 

But you should identify the proper technique to do it. As you don’t have to let go of the gas, slightly decrease its pressure before pressing down again with your foot. 

In an automatic transmission, letting off the accelerator pedal will slow down your car and eventually bring it to a stop because there is no engine compression from a throttle cable pulling against an idle engine in an automatic transmission like there is in a manual transmission. 

This let-off is necessary because there is no clutch pedal to press down to engage the transmission.

The shifter does not usually have a kick-down mechanism that allows you to drop a gear before you shift, so you have to press down on the clutch lever or foot brake pedal before starting the car’s engine. 

Some vehicles, especially modern ones, will accelerate faster and change up automatically if you release the gas while shifting into second.

Table of Contents

How To Drive A Stick Shift?

Driving a stick shift isn’t hard if you know how to drive it. But if you do not know, you can learn it in driving school without any worry or effort.

If you take up driving, learning how to do it right would be a good idea since most road accidents happen when drivers don’t know how to drive a stick shift or forget they are driving that way in traffic. It’s easy to learn how to drive a stick shift. 

The power of a stick shift is good for overtaking on under-trafficked roads and for off-roading when the road surface condition allows it. 

It is fast and easy to drive, but that isn’t its best quality as far as driving safety is concerned. Stick shift makes a driver attentive to their surroundings. 

That doesn’t mean people who have taken up driving stick shift are always looking at the rear-view mirror, but they know where they are and what might happen. 

They can be in a situation where they hit a pedestrian walking down the road or someone cutting across their way, and the stick shift would help them overcome those situations with greater control than a regular car. 

You will want to practice shifting gears before you get into any heavy traffic where your eyes need to stay on the road you are on.

 The best way to learn how to drive a stick shift is through hands-on experience. 

7 Things You Shouldn’t Do In an Automatic Transmission Car

Learn To Drive A Stick Shift With These trouble-free Steps

Learning how to drive a stick shift is easy as long as you take it slow and follow the proper steps. 

  • 1. Start with parking at a flat, level location with plenty of space in front and back of the vehicle. This is for extra visibility.
  • 2. Make sure your emergency brake is set so that you can apply pressure without your transmission moving.
  • 3. Place the vehicle in first gear, apply pressure on the brakes to keep it from rolling, and pull the clutch up.
  • 4. Move the clutch down and push on the gas pedal.
  • 5. Slowly move the car into second gear and apply pressure to the brakes again.
  • 6. As soon as you are in second gear, release the emergency brake and begin accelerating.
  • 7. Apply pressure to the gas pedal, gradually increasing speed by moving your foot down on the pedal, making sure to keep your foot firmly planted on it.
  • 8. Make sure you’re accelerating enough so that if you applied your emergency brake suddenly, it would slow at least a little bit. 
  • 9. To get back into first gear, briefly accelerate before shifting gears.
  • 10. When you have finished driving, shift the car back into the park. 

 These are the easy ten steps in which you can learn to drive with a stick shift. You should often practice if you want to learn it quickly. 

Do You Let Off The Gas When Shifting An Automatic?

Does Giving Gas While Releasing The Clutch Cause Unnecessary Wear?

No, it does not cause a major problem if you release a tiny clutch with a small amount of gas at the same time. So you will be alright in this case. 

Over the past few years, there has been a lot of discussion about whether it is necessary to give gas while releasing the clutch when starting your car. 

Some think doing so wears out the clutch faster than not providing any extra gas or doesn’t matter, but this is false information. While you may use more fuel if you are giving gas while letting off of the clutch, this does not affect any wear on your car’s engine.

Well-engineered cars are designed to withstand these conditions. When you give gas while letting off the clutch, it is just like pushing a foot pedal a bit as you stop. 

Humming Noise After Wheel Bearing Replacement; Why?


Your car is designed to feel that slight pressure of the pedal and recognize it as a stopping point. This doesn’t increase your car’s wear but instead allows your vehicle to handle the added stress of starting.

However, if you have an un-engineered vehicle or if your car isn’t designed well enough to handle this extra pressure while turning, this can be damaging. 

Operators who aren’t familiar with the car’s handling will notice that it starts much more severely than it should. This can cause the transmission to slip on a hill and slide out of gear, or worse yet, continue going in the wrong direction altogether.

As a result, many cities insist that you give gas while letting off the clutch. This is to help prevent accidents and prevent damage to your transmission, which can be very costly to fix. If you have this restriction in your city, you should comply with it.

Leave a Comment

Your email address will not be published.