Can You Install Vtec On A Non-Vtec Engine? 

Many people are under the impression that you can’t install Vtec on a non-Vtec car, but that’s not true. It just takes a little more work to make it happen.

Installing Vtec on a non-Vtec car can be tricky, but it’s definitely doable. 

I’ll show you how to do it. By following the simple guide below, you’ll be able to install Vtec on your car in no time.

Table of Contents

How Can You Install Vtec On A Non-Vtec Engine?

You can follow a straightforward procedure to add VTEC to a vehicle that does not already have it. It’s called a “mini-me” swap. To complete the installation, it is necessary to wire up the vtec as well as the head, the ECU, and the vtec solenoid.

However, there is no direct replacement for VTEC in a non-VTEC. As a result, the engine’s power and performance will be limited compared to those of a VTEC engine. So, let’s clearly explain, “Can you install vtec on a non-vtec engine?” and how to do it. 

What Are A Vtec Engine And Non Vtec Engine?

Honda developed VTEC (Variable Valve Timing and Lift Electronic Control) to give drivers more flexibility. Non-VTEC engines had one camshaft profile before VTEC. This can be set for high or low RPMs. VTEC lets the engine switch between two camshaft profiles based on vehicle use.

VTEC: How It Works

Low RPM camshafts provide quick acceleration at low speeds and better fuel economy. High RPM optimization is aggressive and used for racing. High RPM engines burn more fuel and are less responsive at low speeds. 

This is more than made up for by higher RPM power, which translates to a higher top speed. Non-VTEC engines can only be optimized for one or the other. VTEC accomplishes this by electronically switching profiles. The VTEC engine uses vehicle speed, engine RPM, and other factors to switch profiles.

Non-VTEC engines are widely available from various automakers. VTEC engines are Honda-only. Other automakers have technologies that mimic VTEC, but they’re called something else.

VTEC and non-VTEC engines are equally suitable for daily driving. VTEC engines are flexible and meet your needs. VTEC engines may cost more initially, but they can save you money on fuel, especially with rising prices.

How To Wire Up Vtec In A Non-Vtec Car?

There are a few different approaches to wiring a Vtec system into a car that does not have a VTEC system. Using the harness from the factory is one option; however, this will necessitate some modifications. 

You can also purchase a harness and wiring kit from an aftermarket supplier, which should be simpler to install. Fine! Now you have a clear answer to the question, ‘ Can you install vtec on a non-vtec engine?’

How To Wire Vtec To A Switch?

You can wire vtec to a switch by following these few simple steps. Using a straightforward modification to the wiring, this can be easily circumvented. Find the plug and wire for the VTEC oil pressure switch on the engine harness of your vehicle (this wire comes from OBD1 ECU pin D6). 

Utilize a standard T-tap or any other method, and then merely tap this into the wire leading to the VTEC solenoid valve (the VTEC solenoid wire comes from OBD1 ECU pin A4).

VW 2.5 Engine

engine diary

Vtec Engine Benefits

The VTEC engine produces 306 horsepower before the 7,000-rpm redline, making it the most powerful Honda in the world. It can be one of the most potent street-legal Hondas in the world, with a peak power output of 153 horsepower per liter.

To begin with, the VTEC head was designed to have a higher flow rate. VTEC did not provide all of the available power then. You can rest assured that installing VTEC will boost your car’s overall power and performance. VTEC can add between 10 and 30 horsepower to your vehicle. 

VTEC (Variable Valve Timing and Lift Electronic Control) increases performance while reducing fuel consumption at low revs. VTEC was designed by Honda to improve the volumetric efficiency of four-stroke internal combustion engines.

Is Vtec better than non-vtec? There is no definitive answer to this question as it depends on the specific application. For example, VTEC may be better suited for specific engines in some cases, while non-VTEC may be better for others.

Ultimately, it is essential to consult with a qualified mechanic or engineer if you are unsure which kind of engine your vehicle has.

Can you put a Vtec engine in any car?

This question doesn’t have a universal response because it depends on the make and model of the car. But adding VTEC to a car usually means changing the engine, which might or might not be possible.

Is VTEC better than turbo?

There is no clear answer to this question because it depends on how it will be used. For example, some engines may work better with VTEC, while others may work better without it. In the end, if you don’t know what kind of engine your car has, you should talk to a qualified mechanic or engineer.

Is the VTEC engine powerful?

Before 7,000 rpm, this VTEC engine makes 306 horsepower, making it the most powerful Honda engine in the world. With a maximum power output of 153 horsepower per liter, it could be one of the most potent Hondas that can be driven on the street in the world.

Does VTEC make a car faster?

Yes, VTEC speeds up a car. VTEC is a system that lets a car’s engine work better, making the car go faster.

Can You Install a Vtec Cam In Non Vtec Head

Theoretically, it is impossible to replace a vtec cam in a non-vtec head, mainly because the structure of a VTEC cam does not fit appropriately in non-VTEC heads. However, it will only require a straightforward regrind to be installed.

Is VTEC only for Honda?

Yes, VTEC is a trademarked name for a type of engine technology developed by Honda.
It stands for Variable Valve Timing and Lift Electronic Control, and it’s a system that allows the engine to run in different modes depending on how much power is needed.
Other automakers have developed their own versions of this technology, but Honda is the one that’s most associated with it.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *