Jeep App Not Updating: [Here’s the Fix for You!]

Although the Jeep app’s been a hit, recently the users have been struggling to update it. Different prerequisites and obstacles are blocking the entire process of upgrading the Jeep app.

This problem is stopping the users from experiencing the latest version of the Jeep app.

So, why is the jeep app not updating?

Firstly, an incompatible operating system or version can stop the app from updating. Secondly, inadequate storage space can cause this issue. Thirdly, a slow wifi or data internet connection can be a reason for this problem. Lastly, any bugs in the app can stop you from updating it.

Along with a detailed explanation of these reasons, I’ve provided the fixes as well. Read this article till the end to properly fix this problem!

4 Reasons and Fixes Behind the Jeep App Not Updating

For this problem, a few reasons regarding compatibility and device environment can be taken into account. This table has summed up the reasons and solutions-

Reasons for Jeep App Not Updating	Solutions to Update the App
Incompatible operating system	Update operating system
Low storage space	Increase storage space
Poor Internet Connection	Connect to a reliable internet connection
App bugs	Restart and reinstall the Jeep app

I’ve elaborated the reasons and the corresponding solutions down below because you’ll need detailed guidelines. Check it out!

Reason 1: Incompatible Operating System

This is the most common reason behind a failed updating process of an app. The OS and android requirements are often overlooked when updating any app.

Solution:

To upgrade the operating system of your device, you must know your device’s OS and android version. The upgradation process for iOS devices and Android devices is different.

If you have an iPhone, you need to have iOS 11.0 or later. This criterion must be fulfilled to download and update the Jeep app.

Additionally, if you’re an Android user, your android version must be 6.0 or higher. Similar to iOS, these are the minimum requirements for the Jeep app.

To upgrade the android device-

Firstly, charge your device fully. Make sure your phone/tablet is at least 80% charged.
Secondly, connect the device to a reliable internet connection. It can be either a wifi or a data connection.
Thirdly, open the settings app on your android. Then, select ‘About phone’. There, you will see a ‘Check for Updates’ section. Select it and it’ll start checking the latest android version available for your device.
Finally, it should find a new version. Install the update by hitting the ‘Update Now’ button. It will take around 10-15 minutes to update your android device.

To upgrade your iOS device-

Firstly, charge your device to at least 60% and connect to a wifi/data connection.
Secondly, go to the settings app of your iPad/iPhone/iPod. Then go to the ‘General’ section and tap on ‘Software Update’.
Thirdly, tap on ‘Automatic Updates’ and then download the iOS updates. It will search for the latest iOS version.
Finally, you can select the time you want to update the device. If you’re willing to update instantly, tap ‘Install Now’. Alternatively, you can schedule the update for a later time.

Reason 2: Low Storage Space

Every application on your device will consume a bit of storage. The same goes for the Jeep app. If your mobile doesn’t have sufficient storage, the Jeep app might fail to update. Yet, there are ways to increase space on your device.

Solution:

To make some storage space for the Jeep app, you can start by uninstalling unused apps. The unused apps on your phone hog up some necessary storage space which ultimately is wasted.

You can also try installing a micro SD card on your device to increase the external storage. However, it depends on your device though. You can only install micro SD cards on your device if it has a slot for it.

A 4GB micro SD card will be more than enough to successfully update the Jeep app. Still, you can go for a bigger option if you want.

Reason 3: Poor Internet Connection

The Jeep app can only update when your device is connected to the internet. Even if you have the internet, the connection might be unstable which can hinder the update.

Solution:

To solve this problem, start off by checking if your device is connected to the internet. You can connect to the internet via wifi or mobile data connection.

If you’re connecting to the wifi, try to connect to a stable wifi connection. If your wifi connection is poor, don’t worry. There are methods to fix an unstable wifi connection.

You may be connected to wifi and still not connected to the internet. In that case, contact your ISP. You can also try restarting your modem and router.

On the other hand, you may also connect to a data connection to update the app. Try to get at least 3 bars of network signal.

That way, you can get the best out of your data pack and the Jeep app can be updated. If you have run out of data, buy a new data package.

Reason 4: App Bugs

App bugs can mess up the upgrade of the Jeep app badly. It can even cause the Jeep app to malfunction at times!

For example, sometimes you may see the Jeep remote start failing due to this. But don’t stress too much, because it’s possible to bypass the bugs.

Solution:

The first approach to this problem is restarting your device. Close all the applications on your device and restart the device. Then, attempt to update the Jeep app again.

If it still does not work, you can try to uninstall and reinstall the app. That will get rid of some bugs and allow the update to come through.

Frequently Asked Questions (FAQs):

What is the Jeep Life app?

The Jeep Life app is an app made for Jeep owners. This app lets you control a few basic functions of your Jeep. For instance, locking and unlocking the car, activating the horn and blinking lights, etc.

Why is my Jeep Uconnect app not working?

The Jeep Uconnect app may fail to work for a couple of reasons. If your subscription to the Uconnect access or SXM guardian has ended, the app might not work. Also, head over to the google play store/iOS store to make sure you have the latest version of the app.

Do you have to pay for the Jeep app?

No, the base Jeep app is free. However, you will need subscriptions to keep the app functional and the subscriptions are paid. By buying the subscriptions, you can get a few extra features to implement on your Jeep!

Conclusion

That’s everything to know when you find the jeep app not updating. Hopefully, this article will assist you through all the technical problems you’re facing!

Always try updating software and apps when you’re connected to a stable internet connection. That way, the updating process will be foolproof and hassle-free.

Best of luck and have a great day.